Industrial Direct Drive 12 Air Curtain
Industrial Direct Drive 12 EntranceLoading DockIndustrial Direct Drive 12 Door

Industrial Direct Drive 12

Model # IDC12

For mounting heights to 12′ (environmental separation) and 10′ (insect control).

Available in single lengths from 3′ to 16′. Durable, all welded construction with gray powder-coated exterior and mill aluminum inlet panel. Designed to be simple to install, operate and maintain.

  • Used to keep temperatures stable and flying insects out when the doors are open.
  • Engineered to perform and built to last
  • Simple to install, operate, and maintain
  • Made in U.S.A.

Berner is a UL Listed panel shop, authorized to build UL listed Motor Control Panels.

Clear selection
SKU: e1107ca077f6. Category: .

AMBIENT

  • 15″ high x 18″ deep
  • ½ hp single-speed motor(s) — direct drive (optional: three-speed)
  • Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
  • Wall and top mounting
  • High efficiency Pro-V Nozzle

ELECTRIC HEAT

  • 15″ high x 18″ deep
  • ½ hp single-speed motor(s) — direct drive (optional: three-speed)
  • Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
  • Wall and top mounting
  • High efficiency Pro-V Nozzle
  • Patented venturi open helical element with point suspension
    • Thermal overload protection
    • Galvanized steel frame
  • Factory mounted heater control panel
  • Alternate KW available

STEAM/HOT WATER HEAT

  • 15″ high x 18″ deep
  • ½ hp single-speed motor(s) — direct drive (optional: three-speed)
  • Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
  • Wall and top mounting
  • High efficiency Pro-V Nozzle
  • Coil features:
    • Galvanized steel casing
    • 5/8″ copper tube with .035″ wall
    • Aluminum fins
    • Leak tested at 450 psi

POSITIVE INDIRECT GAS

See mechanical drawings for dimensions.

  • ½ hp single-speed motor(s) — direct drive (optional: three-speed)
  • Gray powder-coated exterior with mill aluminum screen and access panels (optional: custom color or stainless)
  • Top mounting only
  • High efficiency Pro-V Nozzle
  • Factory mounted duct transition with bottom access panels
  • Field installed CSA Certified indirect gas heater(s):
    • Aluminized steel heat exchanger (optional: stainless)
    • Steel cabinet with beige finish
    • Spark ignited pilot
    • Power venter
    • Separate 120V power supply required (optional: transformer for single point connection)

This model requires a separate Activation Switch. All air curtains using control panels require an Activation Switch to be ordered with the panel. Models with Electric Heat include a factory mounted control panel.

CONTROL PANELS

Standard location: Factory installed on left hand end plate of air curtain. Optional locations: Right hand end plate or remote mounted.

Single Phase Control Panels

A single phase control panel is required when:

  • A time delay is used
  • 24 volt control is used
  • When motor quantities exceed: (2) 1/2 hp @ 120V or (3) 1/2 hp @ 208-240V

An activation switch must be selected along with the panel for activation of the air curtain.

Standard Control Panel Construction: NEMA 4/12 Enclosure, Motor Contactor (factory wired), Terminal Strip, Fusing (as required), Time Delay (as required).

Optional control panel enclosure constructions: Poly Fiberglass, Aluminum, Stainless Steel

Three Phase Control Panels

All three phase power supplies require a three phase control panel and an activation switch.

Standard Control Panel Construction: NEMA 4/12 Enclosure, Motor Contactor (factory wired), Terminal Strip, Fusing (as required), and Time Delay or 120V Control Transformer (as required).

Optional control panel enclosure constructions: Poly Fiberglass, Aluminum, Stainless Steel

CONTROL PACKAGES

Control Packages: Electric Heated Models Only

Models with Electric Heat include a factory mounted control panel.

Basic Control Package – Recommended for openings where the door stays open for an extended period or does not have a lot of traffic.

  • Air curtain turns on when door is opened and shuts off when door is closed.
  • Consists of a door switch (roller, plunger, whisker arm, magnetic reed, or heavy duty magnetic reed style) and 24 volt control.

Deluxe Control Package – Recommended for high traffic openings.

  • Air curtain turns on when door is opened, when the door closes, the unit remains on until set delay time expires.
  • Consists of a door switch (roller, plunger, whisker arm, magnetic reed, or heavy duty magnetic reed style), a time delay, and 24 volt control.

ELECTRICAL ACCESSORIES

  • Door Switches: roller, plunger, whisker arm, magnetic reed, heavy duty magnetic reed style
  • Hand/Off/Automatic switches
  • Disconnect Switch(es) – toggle disconnects based on number of power supplies required
  • Remote Thermostat & Locking Cover
  • Indirect Gas Heater Transformer – remote mounted

MECHANICAL ACCESSORIES

  • Wall support brackets
  • Extension brackets
  • Floor mounting brackets
  • Vertical tandem mounting bracket
  • ½” Washable filters
  • Nozzle extensions

For details, contact your Berner Representative.

  • AMCA
  • C-UL
  • FDA
  • USDA